Infinium
Infinium Cleo Vital Signs Patient CO2,NIBP and SPO2Monitor
Cleo is a new and intuitive approach to patient vital signs measurement. The Cleo can be configured to measure any combination of: non-invasive blood pressure, SpO2, rapid temperature, and capnography (EtCO2). Weighing in at less than 3 LBS the portable Cleo is well suited for any patient care area by offering a multitude of vital sign combinations. The Cleo can be used as a basic pulse oximeter or configured to a NIPB/SpO2 spot check monitor. Cleo can also be configured to be a stand-alone capnograph or combination capnograph/SpO2/NIPB monitor. The Cleo is well suited for both bed side and mobile spot check use. The Cleo simplifies clinician use by incorporating a touch screen with a simple user interface making the Cleo intuitive for any user. A long life lithium Ion battery is standard and many mobile mounting solutions’ are available for the Cleo.
The Infinium Capnotrack® capnography system is a cutting edge low flow End-tidal CO2 measuring system. The Capnotrack® uses a 50/ml per minute sidestream method to deliver the most accurate EtCO2 readings. Non-proprietary sample lines allows the Cleo to be the industry’s lowest cost per patient End-Tidal CO2 monitors. The Capnotrack® can be used on both intubated and non-intubated patients. The Capnotrack® sample line connection system uses filter cells to eliminate the potential of cross contamination
Infinium Cleo Vital Signs Patient CO2,NIBP and SPO2Monitor
Cleo is a new and intuitive approach to patient vital signs measurement. The Cleo can be configured to measure any combination of: non-invasive blood pressure, SpO2, rapid temperature, and capnography (EtCO2). Weighing in at less than 3 LBS the portable Cleo is well suited for any patient care area by offering a multitude of vital sign combinations. The Cleo can be used as a basic pulse oximeter or configured to a NIPB/SpO2 spot check monitor. Cleo can also be configured to be a stand-alone capnograph or combination capnograph/SpO2/NIPB monitor. The Cleo is well suited for both bed side and mobile spot check use. The Cleo simplifies clinician use by incorporating a touch screen with a simple user interface making the Cleo intuitive for any user. A long life lithium Ion battery is standard and many mobile mounting solutions’ are available for the Cleo.
The Infinium Capnotrack® capnography system is a cutting edge low flow End-tidal CO2 measuring system. The Capnotrack® uses a 50/ml per minute sidestream method to deliver the most accurate EtCO2 readings. Non-proprietary sample lines allows the Cleo to be the industry’s lowest cost per patient End-Tidal CO2 monitors. The Capnotrack® can be used on both intubated and non-intubated patients. The Capnotrack® sample line connection system uses filter cells to eliminate the potential of cross contamination
Designed for a fast paced work environment, the Infinium Omni™ patient monitor offers an extremely simple and adaptable user interface. Patient information along with vital sign settings can be quickly modified to meet the needs of a patient’s changing condition. The Omni offers a high resolution 10.5 inch touch screen to optimize the speed of patient care. The user can therefore make quick screen adjustments, set default settings, alarm limits, and manage up to 72 hours of detailed patient data.
Upgradable
From the general floor to high acuity surgeries, the Infinium Omni
series patient monitors are designed to fit-in and move amongst
many patient care areas. The Omni™ offers standard measurements
of: non-invasive blood pressure, ECG with arrhythmia detection,
motion tolerant SpO2, Temperature, and Respiration rate. Endtidal
CO2, Anesthetic Agent measurement, Cardiac Output and
Invasive blood pressure can added on-site by simply attaching
our plug in modules. This field upgradability can allow the user to
customize the monitor’s acuity level while the patient’s condition
changes. If desired, the user can move from a basic vital signs
monitor, to a continuous bed side monitor, to an operating room
monitor while keeping the patient on a single monitor at all times.
Connective
The Omni™ offers several connective solutions to network multiple
monitors and/or manage patient data on an electronic medical
records platform or a HL7 based hospital information system. The
Omni patient monitor offers Ethernet and RS-232 connections with
an open source communication protocol. Infinium offers 2 levels of
networking and connectivity. The Omni is HL7 compliant. The HL7
network protocol will allow for all patient information and vital sign
trends to be transferred and stored on a hospital information system.
For non-HL7 medical facilities, there is the Infinium Omniview™
central station which allows the real time remote monitoring and
network of up to 32 Omni patient monitors. The Omniview™
archives full disclosure of all patient vital sign trends. The patient
data from the Omniview™ can be very simply saved, stored, printed,
and, transferred.
Designed for a fast paced work environment, the Infinium Omni™ patient monitor offers an extremely simple and adaptable user interface. Patient information along with vital sign settings can be quickly modified to meet the needs of a patient’s changing condition. The Omni offers a high resolution 10.5 inch touch screen to optimize the speed of patient care. The user can therefore make quick screen adjustments, set default settings, alarm limits, and manage up to 72 hours of detailed patient data.
Upgradable
From the general floor to high acuity surgeries, the Infinium Omni
series patient monitors are designed to fit-in and move amongst
many patient care areas. The Omni™ offers standard measurements
of: non-invasive blood pressure, ECG with arrhythmia detection,
motion tolerant SpO2, Temperature, and Respiration rate. Endtidal
CO2, Anesthetic Agent measurement, Cardiac Output and
Invasive blood pressure can added on-site by simply attaching
our plug in modules. This field upgradability can allow the user to
customize the monitor’s acuity level while the patient’s condition
changes. If desired, the user can move from a basic vital signs
monitor, to a continuous bed side monitor, to an operating room
monitor while keeping the patient on a single monitor at all times.
Connective
The Omni™ offers several connective solutions to network multiple
monitors and/or manage patient data on an electronic medical
records platform or a HL7 based hospital information system. The
Omni patient monitor offers Ethernet and RS-232 connections with
an open source communication protocol. Infinium offers 2 levels of
networking and connectivity. The Omni is HL7 compliant. The HL7
network protocol will allow for all patient information and vital sign
trends to be transferred and stored on a hospital information system.
For non-HL7 medical facilities, there is the Infinium Omniview™
central station which allows the real time remote monitoring and
network of up to 32 Omni patient monitors. The Omniview™
archives full disclosure of all patient vital sign trends. The patient
data from the Omniview™ can be very simply saved, stored, printed,
and, transferred.
Designed for a fast paced work environment, the Infinium Omni (K)™ patient monitor offers an extremely simple and adaptable user interface. Patient information along with vital sign settings can be quickly modified to meet the needs of a patient’s changing condition. The Omni (K) offers a high resolution 10.5 inch touch screen to optimize the speed of patient care. The user can therefore make quick screen adjustments, set default settings, alarm limits, and manage up to 72 hours of detailed patient data.
Upgradable
From the general floor to high acuity surgeries, the Infinium mni (K) series patient monitors are designed to fit-in and move amongst many patient care areas. The Omni (K)™ offers standard measurements of: non-invasive blood pressure, ECG with
arrhythmia detection, motion tolerant SpO2, Temperature, and Respiration rate. End-tidal CO2, Anesthetic Agent measurement, Cardiac Output and Invasive blood pressure can added on-site by simply attaching our plug in modules. This field upgradability can
allow the user to customize the monitor’s acuity level while the patient’s condition changes. If desired, the user can move from a basic vital signs monitor, to a continuous bed side monitor, to an operating room monitor while keeping the patient on a single monitor at all times.
Connective
The Omni (K)™ offers several connective solutions to network multiple monitors and/or manage patient data on an electronic medical records platform or a HL7 based hospital information system. The Omni (K) patient monitor offers Ethernet and RS-232 connections with an open source communication protocol. Infinium offers 2 levels of networking and connectivity. The Omni (K) is HL7 compliant. The HL7 network protocol will allow for all patient information and vital sign trends to be transferred and stored on a
hospital information system. For non-HL7 medical facilities, there is the Infinium Omniview™ central station which allows the real time remote monitoring and network of up to 32 Omni patient monitors. The Omniview™ archives full disclosure of all patient vital sign trends. The patient data from the Omniview™ can be very simply saved, stored, printed, and, transferred.
Designed for a fast paced work environment, the Infinium Omni (K)™ patient monitor offers an extremely simple and adaptable user interface. Patient information along with vital sign settings can be quickly modified to meet the needs of a patient’s changing condition. The Omni (K) offers a high resolution 10.5 inch touch screen to optimize the speed of patient care. The user can therefore make quick screen adjustments, set default settings, alarm limits, and manage up to 72 hours of detailed patient data.
Upgradable
From the general floor to high acuity surgeries, the Infinium mni (K) series patient monitors are designed to fit-in and move amongst many patient care areas. The Omni (K)™ offers standard measurements of: non-invasive blood pressure, ECG with
arrhythmia detection, motion tolerant SpO2, Temperature, and Respiration rate. End-tidal CO2, Anesthetic Agent measurement, Cardiac Output and Invasive blood pressure can added on-site by simply attaching our plug in modules. This field upgradability can
allow the user to customize the monitor’s acuity level while the patient’s condition changes. If desired, the user can move from a basic vital signs monitor, to a continuous bed side monitor, to an operating room monitor while keeping the patient on a single monitor at all times.
Connective
The Omni (K)™ offers several connective solutions to network multiple monitors and/or manage patient data on an electronic medical records platform or a HL7 based hospital information system. The Omni (K) patient monitor offers Ethernet and RS-232 connections with an open source communication protocol. Infinium offers 2 levels of networking and connectivity. The Omni (K) is HL7 compliant. The HL7 network protocol will allow for all patient information and vital sign trends to be transferred and stored on a
hospital information system. For non-HL7 medical facilities, there is the Infinium Omniview™ central station which allows the real time remote monitoring and network of up to 32 Omni patient monitors. The Omniview™ archives full disclosure of all patient vital sign trends. The patient data from the Omniview™ can be very simply saved, stored, printed, and, transferred.
INFINIUM OMNI K PATIENT MONITOR w/ CO 2
Designed for a fast paced work environment, the Infinium Omni (K)™ patient monitor offers an extremely simple and adaptable user interface. Patient information along with vital sign settings can be quickly modified to meet the needs of a patient’s changing condition. The Omni (K) offers a high resolution 10.5 inch touch screen to optimize the speed of patient care. The user can therefore make quick screen adjustments, set default settings, alarm limits, and manage up to 72 hours of detailed patient data.
INFINIUM OMNI K PATIENT MONITOR w/ CO 2
Designed for a fast paced work environment, the Infinium Omni (K)™ patient monitor offers an extremely simple and adaptable user interface. Patient information along with vital sign settings can be quickly modified to meet the needs of a patient’s changing condition. The Omni (K) offers a high resolution 10.5 inch touch screen to optimize the speed of patient care. The user can therefore make quick screen adjustments, set default settings, alarm limits, and manage up to 72 hours of detailed patient data.